The nature of our melting and casting operations does not allow free iron, zinc, copper and silicon in the scrap we use. Vinyl or plastic coated or excessively oily materials are banned. Loose material are acquired as needed.
Aluminum No Ink Litho Sheet shall consist of ink free and bluewash lithographers scrap of alloys 3003 or 1100 or a combination of the two.
Aluminum Light Ink Litho Sheet shall consist of alloys 3003 and/or 1100, be free of paper, plastic, excessively inked sheets and any other contaminants.
Aluminum wire and cable (bare) and old coils shall consist of old, unalloyed aluminum wire and cable which may contain up to 10% 6000 series wire and cable with no free oxide or dirt and free from stainless steel, hair wire, wire screen, insulation and any other foreign substance.
MLC shall consist of clean, uncoated and unpainted low copper aluminum scrap of two or more alloys and to be free of 2000, 4000 and 7000 series, road or highway signs, license plates, radiators, finstock, foil, hair wire, screen wire, dirt, plastic and other foreign substances. Also free from punchings, turnings, shavings, scalper and fines.
They shall consist of clean, uncoated and unpainted aluminum scrap of one specified alloy ONLY and to be free of foil, hair wire, screen wire, dirt, screen frame, old corrugated sheet, plastic and other foreign substances. Also free
from punchings, turnings, shavings, scalpers and fines.
Aluminum wire and cable (bare) and old coils shall consist of old, unalloyed aluminum wire and cable which may contain up to 10% 6000 series wire and cable with no free oxide or dirt and free from stainless steel, hair wire, wire screen, insulation and any other foreign substance.
Painted 3004 aluminum shall consist of clean, painted one side, free of iron, dirt, corrosion, fiber or paper backing and any other foreign contamination.
Painted Aluminum Siding shall consist of new clean, low copper aluminum siding scrap, painted one side ONLY, free of iron, dirt, corrosion, fiber backing, pastisol and any other foreign contamination.
Jupiter Aluminum Corporation daily recycles large amounts of numerous scrap varieties. Alloys produced drive scrap purchases. We buy from North American sources.
Email: scrap@jupiteraluminum.com Toll free: +1 800 544 2069
The nature of our melting and casting operations does not allow free iron, zinc, copper and silicon in the scrap we use. Vinyl or plastic coated or excessively oily materials are banned. Loose materials are acquired as needed.
Segregated Aluminum Alloy Clippings and Solids
Acceptable alloys: 3000 series, 1000 series, 5005, 5052, 6061, 6063. Any other alloys MUST be discussed prior to shipment with the scrap purchaser and agreed upon in WRITING.
They shall consist of clean, uncoated and unpainted aluminum scrap of one specified alloy ONLY and to be free of foil, hair wire, screen wire, dirt, screenframe, old corrigated sheet, plastic and other foreign substances. Also free from:
Punchings, turnings, shavings, scalpers and fines.
Gauge MUST be at least .016"
Acceptable packaging:
Baled
Briquettes on skids
Boxes ($10 per box fee is applied) — Minimum weight 1,200lbs. or otherwise discussed and agreed upon in writing
Skids
Loose in dump truck
